Bridges

[Simooone05]

Did anyone figure out a way to make a bridge that you walk under and on top of?

[Cepat]

This is quite a tedious process, but to put it simply, you put temp triggers at the bridge bottom, then this way you can make Link walk below the bridge. When you return to the top part of the bridge, Link will be walking above the bridge.
Don't forget to put the relevant flags at Layers 1-2 & 3-4.

[ShadowTiger]

Click Please.. (http://www.purezc.com/forums/index.php?act=ST&f=6&t=2223&s=)

[Freedom]

single screen method.

you draw your bridge on layer 2 and set the bridge tiles in layer 3 secret combos.
then you set temp triggers on each tide of the bridge to be activated when link walks under the bridge to change it from layer 2 to lay 3
you put a clear tile in secret combos layer 2 flag 16 so it will remove the layer 2 bridge when it adds the layer 3 bride when triggered.
you set no walk and walkable tiles on layer 0 or 1 so link can't walk out the side of the bridge.

set up like this, link walks over the bridge normally and under when triggered, if you want it to work the opposite, then just set it up the oposite way, with temp triggers triggering layer 3 instead of layer 2.

You are just simply toggling the bridge back and forth, from layer 2 to layer 3.